MX-RX62-A receiver 0.6g FlySky AFHDS 2A 8CH receiver brush ESC

This receiver is FlySky AFHDS 2A 8CH compatible receiver comes with built-in brush ESC

MX-RX62-X series of receivers are newly developed super small receivers, it provides 5 independent PWM outputs and one 5A/1S brush ESC output. It can also set up PPM output. It fits very well on micro model planes and micro model car installation, also we added TELEM function to its advanced version. We now can supply up to 8 versions of the series receivers.

• Small size: 16.0*10.0*2.5mm (not including antenna)
• Super light: 0.5g(including antenna)
• Working voltage:3.0~4.2V
• With built-in 5A/1S brush ESC (Start-Lock function)
• Support connecting outside brush ESC or brushless ESC
• Modified and perfected binding program (DSMX/2)
• Support TELEM function(only available on advanced version)
• Binding automatically

Ports:

How to set up PPM output:

Please check the above picture, when CH5 is connected to GND, CH1 will be PPM output, the built-in brush ESC is still working.

Auto binding

As it is difficult to reach the binding button when the receiver has been installed inside the plane, we developed self-binding function, it works like this: The receiver will enter binding mode automatically after powered and no signal for 15 seconds (slow flashing LED light turns to fast flashing), then complete the binding operation according to your transmitter binding manual.