MA-RX42-A FlySky AFHDS 2A compatible 8CH receiver 1.0g V2

CR256
5g

$15.90

Submit a wholesale Inquiry
16 reward points
Qty: Unit(s)

This version is FlySky AFHDS 2A compatible receiver! it comes with power connector soldered(1.25mm 2P female connector)
 
MA-RX42-X V2 series of receivers are upgraded from the old version(2016), smaller and more stable with additional TELEM function.  It still provides 4 independent output ports and 1 integrated 5A/1S brush ESC. We can supply up to 8 types of V2 receivers
 
Features:
  • Small size:   18.5*12.0*6.5mm(not including antenna)
  • Super light: 0.9g(including antenna)
  • Working voltage:3.0~5.0V
  • With built-in 5A/1S brush ESC (Lock starting function)
  • Support connecting outside brush ESC or brushless ESC
  • Modified and perfected binding program (DSMX/2)
  • Support TELEM function(only available on advanced version)
  • Binding automatically

Note: not support PPM output anymore!

Port diagram
Auto binding 
As it is difficult to reach the binding button when the receiver has been installed inside the plane, we developed self-binding functionit works like this: The receiver will enter binding mode automatically after powered and no signal for 15 seconds (slow flashing LED light turns to fast flashing), then complete the binding operation according to your transmitter binding ma.
 
 
Start-Lock Function:
 
Start-Lock Function is the onboard brush ESC function of preventing brush motor from starting by mistake.  It can protect the brush motor from starting even throttle stick not at the lowest position when the receiver is powered.
As soon as the receiver gets the signal and the throttle stick on your transmitter is at the lowest position for 2 seconds the first time, Start-Lock will be released then, the brush motor will run when the throttle stick is pushed.
 
 
 
 
 
TELEM function
 
 
TELEM function is useful on monitoring battery voltage, receiver working voltage and its signal strength as well as its working temperature in real time, through which customer can get working state of receiver and battery discharging state under control, so flying out of control range and over discharging will rarely happen ( for brushless motor rotation speed or flight height monitoring, customer needs to choose a more advanced receiver)
 
NOTE: The effective control range of TELEM function depends on transmitter, it is possible that this would happen: the working range of the receiver is far more than TELEM function effective range, it is normal and alright!


There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed

All goods are not marked are three packs of shops


Customer Videos: See all 0 videos
Customer Images: See all 0 images
Sunday 09 February, 2020

This product was added to our catalog on Sunday 09 February, 2020.