LKTR120 Micro FPV Quad frame with 4 DP03 4600KV motors

It comes with 4 DP03 4600KV motors, you can check the motor details from this link: http://www.overskyrc.com/dp03-35g-brushless-outrunner-motor-2s-version-4600kv-p-556.html

The motor is with a 1.5mm pictch white connector.

Motor to motor distance is 120mm, the frame weight is 14.1g

The building link is the following:

http://fpvlab.com/forums/showthread.php?37217-LKTR120-Micro-FPV-Quad-LKTR100-LKTR090

Frame designed by LKTRSMG

 
How to unlock or ARM the motors from a customer after binding:
It finally works! YESSSS!!! - Guess what the problem was?? - The default setting of Minimum Throttle was at 1150ms. Putting this on 1050 made it armable...

I found out about that late last night. Now this morning I'll do my maiden-flight!! - As I am experienced in Copters and all the functions seem to work properly, this should be fun! :-)

Thank You for Your support, maybe You can put this on Your site to help others, because I read a lot from other pilots having problems arming the little quad, especially with DX7...