DP03 3.5g brushless outrunner motor 1S version 7800KV

Description:

Test Data on 1S：

Weight：3.5g

KV：7800

Idle current：0.18A/3.5V

Max current：2.95A

Shaft:1.5mm

Test result on 75mm propeller：Full throttle 45g/2.95A/3.7V

                                                          Half throttle 21g/1.2A/3.7V

                                                           Below half throttle  13g/0.65A/3.7V

As it is a very small motor, propeller saver is not recommended, because the propeller saver will be too heavy compare with such a small motor, you can use a plastic tube on the shaft and push the propeller onto the shaft. Diameter of the motor is 14mm Shaft is 1.5mm Screw hole spacing is 8.5mm, the screw is M1.4*3