XR601T-D Spectrum DSMX/2 receiver on drone quad copter drones

CR219
5g

$25.60

Submit a wholesale Inquiry
26 reward points
Qty: Unit(s)

XR601T-D is newly designed receiver supports telemetry, which has a multifunctional UART portDMA operation for double and two-way communication, it can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with DSMX/DSM2 protocol.

PRODUCT SPECIFICATIONS

  • Type:  XR601T-A(AFHDS-2A) SBUS/FPORT/RSSI/TELEM Micro FPV receiver
  • Modulation: DSMX/DSM2 Compatible
  • Num of Channels: 16CH
  • Size: 10*17*3mm (without antenna)
  • RC Data output: SBUS(REV) & FPORT(NOR)
  • Supports Telemetry;
  • Telem RF Power: 17dBm;
  • Supports digital RSSI output;
  • Variable RF Link;
  • High speed(7.7ms);
  • Online Firmware updating;
  • Supports RX working temperature measurement;
  • IPEX4 antenna plug;
  • Weight: 0.66g
  • Voltage: 5.0V
  • Effective distance: >1200m
  • Antenna Length:60mm(Default) or 160mm

 

Connection Diagram(Choose SBUS or FPORT):

 

 

How to Bind:

  1. Power the receiver;
  2. Push binding button for 2 seconds, then release it (slow flashing LED turns to fast blinking);
  3. Bind your Radio according to your transmitter manual,  the fast blinking LED will turn to solid bright as soon as the binding is completed!

 

Telem Function(NV14):

 

 

Variable RF Link technology:

 

Variable RF Link technology:  When the receiver is too close to radio(remote control), normally RF signal will be blocked and meanwhile lose control happens, Variable RF Link is born for solving the problem! As soon as Variable RF Link finds that the receiver is coming close to radio, it will adjust LNA gain and PA output power lower to avoid short distance control failure automatically;  When Variable RF Link detects that the receiver is going far away from radio, it will adjust LNA gain and PA output power higher to increase RX’s working range automatically.



There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed

All goods are not marked are three packs of shops


Customer Videos: See all 0 videos
Customer Images: See all 0 images
Monday 10 February, 2020

This product was added to our catalog on Monday 10 February, 2020.