DP03 3.5g brushless outrunner motor 2S version 4600KV

Description:
Test Data on 2S：
Weight：3.5g
KV：4600KV (black heat shrink tube)
Idle current：0.18A/3.5V
Max current：2.1A
Shaft:1.5mm

Test result on 75mm propeller：
7.4V/2.1A/60g thrust  Full throttle
7.4V/0.85A 30g thrust  Half throttle
7.4V/0.35A/15 thrust    low throttle

As it is a very small motor, propeller saver is not recommended, because the propeller saver will be too heavy compare with such a small motor, you can use a plastic tube on the shaft and push the propeller onto the shaft.
Diameter of the motor is 14mm
Shaft is 1.5mm
Screw hole spacing is 8.5mm, the screw is M1.4*3, it comes with a 1.5mm pitch 3P connector